NC Swing Arm Shearing Machines For (1°30' To 4°)

AH Machinery supplies full range of NC Swing Arm Shearing Machine, Sheet Metal Shears, Metal Cutting Machine, Squaring Shears made in Taiwan, customized specifications are available.

/APPLICATIONS/
Aerospace, automobile refit, boilers, bridge appliances, chemical industry, electrical appliances, construction, decoration, electricity, light industry, metallurgy, meters, pressure vessel, ship, steel rolling, tractor and so on.

/SPECIFICATION/
- Type= NC Swing Arm
- Strokes per Minute [S.P.M]= 7-16, 8-12, 8-13, 8-18, 9-15, 9-16, 9-18, 10-20, 11-18, 11-21, 12-20, 12-22, 12-24, 13-22, 13-24, 13-25, 14-23, 14-28, 16-32, 20-40, 23-45
- Rake Angle=1°30´, 2°, 2°30´, 3°, 4°

- Front Gauge Range [mm]= 1300
- Rear Gauge Range [mm]= 1000
- Main Motor [HP/kw]= 15/11.2, 20/14.9, 25/18.6, 30/22.4, 40/29.8, 50/37.3, 60/44.7, 75/55.9
- Capacity [mm]= 6.5x1550, 6.5x1850, 6.5x2500, 6.5x3100, 6.5x3700, 6.5x4100, 6.5x5100, 6.5x6200, 9.5x1150, 9.5x1850, 9.5x2500, 9.5x3100, 9.5x3700, 9.5x4100, 9.5x5100, 9.5x6200, 13.0x1550, 13.0x1850, 13.0x2500, 13.0x3100, 13.0x3700, 13.0x4100, 13.0x5100, 13.0x6200, 16.0x1550, 16.0x1850, 16.0x2500, 16.0x3100, 16.0x3700, 16.0x4100, 16.0x5100, 16.0x6200, 19.0x1550, 19.0x1850, 19.0x2500, 19.0x3100, 19.0x3700, 19.0x4100, 19.0x5100, 19.0x6200, 22.0x3100, 25.0x3100
- Overall Dimensions [mm] [LxWxH]= 2250x2300x2150, 2400x2100x1750, 2400x2150x1950, 2500x2250x2050, 2500x2250x2100, 2650x2100x1800, 2650x2150x1950, 2750x2250x2100, 2850x2300x2150, 2900x2350x2250, 3300x2150x1900, 3350x2200x2050, 3400x2300x2200, 3550x2400x2550, 3600x2500x2800, 3850x2150x1950, 3900x2200x2100, 3950x2300x2250, 4200x2450x2600, 4250x2650x2900, 4300x2700x3050, 4450x2800x3200, 4500x2150x1950, 4550x2250x2150, 4600x2350x2250, 4650x2500x2700, 4700x2600x2900, 4900x2200x2100, 4950x2300x2250, 5000x2400x2400, 5200x2700x2750, 5250x2800x2950, 6000x2750x3050, 6150x2800x3200, 6200x2900x3300, 6350x2900x2850, 6400x2900x3000, 7200x2800x3150, 7250x2900x3200, 7300x2950x3300, 7350x3050x3400, 7400x3200x3550

/ADVANTAGE/
v High Stiffness and Strength: Stress-relieved, unitized box construction of the table and extra thick steel frames provides maximum stiffness and strength for heavy-duty cutting.
v Logic Hydraulic Circuit System: The hydraulic system of our swing beam shear is not only comprised of long life, heavy-duty components but also controlled by sequence valves.
Access and serviceability are made easy.
v Nitrogen Cylinders: Nitrogen cylinders, made in USA, are used as return cylinders. The return cylinders, independent from the hydraulic cylinders, automatically retract the blade to the top of stroke position during power shut-down, emergency, or after the cutting stroke is completed. They improve highly safety and efficiency of machine operation.
v Blade Clearance Adjustment: Drived by worm gear sets of special 360-degree-turning eccentric design to enhance the efficiency of blade clearance adjustment. A conveniently located adjustment on the touch screen enables the operator to accurately adjust the blade clearance on both sides of the machine simultaneously.
v Hold downs are synchronized with the upper blade travel to provide maximum hold down pressure at the moment of shearing, thus, assuring cutting accuracy. As shearing forces on the plate increase, the hold down pressure increases to provide optimum gripping action.
v For fast, visual positioning of sheets with scribed lines or punch marks, an intense light is provided. The light source casts a precise shadow line for accurate positioning and shearing.
v The new 5.7 inch LCD touch screen controls settings for the blade gap adjustment, length of stroke, back gauge setting [mm] and number of cuts. You can store up to 10 different job steps.

/STANDARD/
v Ball Transfer Working Table
v Blade Clearance Adjustment
v Blades
v Finger Guard
v Footswitch
v Front Gauge
v NC Control System
v Nitrogen Cylinders
v Operation Instruction Manual
v Shadow Line Device

/WAREHOUSE/